True online UPS with pure sine wave output, zero transfer time to battery and complete UPS replacement capability with no downtime, SU6000RT4UTF provides the highest level of protection available for mission-critical equipment from all power problems. Converts incoming AC power to DC and reconverts it back to filtered AC output with a pure sine wave, providing ultimate protection. SU6000RT4UTF has a 6kVA/5400W capacity and 16 AC outlets (4 5-15R, 8 5-15/20R, 2 L6-20R, 2 L6-30R). Using the 2U transformer, the SU6000RT4UTF can support both low- and high-voltage equipment. With its detachable PDU, the SU6000RT4UTF is easily hot-swappable by a user of any skill set - no need for lengthy and expensive service calls and no downtime if a repair or battery replacement is needed. In bypass mode, the PDU passes power to equipment without the use of the power and battery modules, allowing them to be removed while keeping your application in operation. UPS battery backup keeps connected equipment operational through short power failures and provides time to save data and perform an orderly system shutdown in case of a prolonged blackout. SU6000RT4UTF’s runtime can be expanded with external battery packs. SU6000RT4UTF features a highly efficient (96%) economy mode setting that can significantly reduce a facility's energy costs by minimizing heat output, reducing cooling requirements and consuming less electricity. LCD display with LED indicators enables IT personnel to monitor operating modes and conditions. LCD/LED panel rotates for viewing in horizontal rack or vertical tower installations and includes an audible alarm that signals various conditions. SU6000RT4UTF features a USB port and a DB9 port that, when used with Tripp Lite's included PowerAlert software, provide comprehensive network power monitoring and control. An optional SNMPWEBCARD accessory can enable the UPS to operate as an IP managed device. Unit requires only 6U of rack space in a standard rack enclosure and can be installed in a 2-post rack using the 2POSTRMKITHD accessory (2 required) or in a tower configuration with the 2-9USTAND accessory.