HDMI Extender over Fiber 984ft/300m over multi-mode, 6.2mi/10km over single mode, HDCP2.2, HDR, w/ IR and RS-232
Series: Evolution
Model: EVEXFBR1
- Transmits audio and video via HDMI as well as bi-directional IR and RS-232
- Transmission range: 984ft/300m over duplex multi-mode fiber optic cables; 6.2mi/10km over duplex single mode fiber optic cables
- Supports 4K@60Hz, 4:2:0 chroma sampling and HDR; 4K@60Hz and 4:4:4 chroma sampling
- Supports HDR10 and Dolby Vision
- Features bi-directional IR (20kHz to 60kHz) pass-through for source and/or display control
The Evolution by Vanco EVEXFBR1 HDMI Extender with bi-directional IR and RS-232, extends 4K HDR video and audio signals up to 984ft/300M over multi-mode fiber optic cables, and 6.2mi/10km over single mode fiber optic cables and modules! Bi-directional IR pass-through allows for source and/or display control. Also features RS-232 pass-through for additional control. For extending HDMI with 4K HDR resolution at an extreme distance, the EVEXFBR1 is a great solution for any application.
The EVEXFBR1 includes two units: transmitting unit (EVEXFBR1-TX) and receiving unit (EVEXFBR1-RX). The transmitting unit is used to capture the HDMI input with control signals and carries the signals via fiber optic cables. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR signals. Both units require power.
- Transmits audio and video via HDMI as well as bi-directional IR and RS-232
- Transmission range: 984ft/300m over duplex multi-mode fiber optic cables; 6.2mi/10km over duplex single mode fiber optic cables
- Supports 4K@60Hz, 4:2:0 chroma sampling and HDR; 4K@60Hz and 4:4:4 chroma sampling
- Supports HDR10 and Dolby Vision
- Features bi-directional IR (20kHz to 60kHz) pass-through for source and/or display control
- RS-232 pass-through
- Supports HDCP2.2
- LC Multi-mode SFP modules included
- Package Contents:
- EVEXFBR1 (TX & RX)
- (1) IR Transmitter
- (1) IR Receiver
- (2) DC 12V Power Supply
- (2) Multi-mode SFP Modules
- (1) Set of Mounting Hardware
- Product Manual
- Extender Type - HDMI
- Extender Type - RS232
- Warranty - Yes
- Spec Sheet available - Yes
- Spec Sheet available - Yes
- DC Voltage: 12 Volts
- Warranty (Length/Type): Limited Lifetime
- Operating Temperature (Minimum): 32 F
- Current Draw: 2 Amps
- Operating Temperature (Maximum): 104 F
- Transmission Range: 984 ft
- Active Power: 10 Watt
- Depth: 1.10 in
- Height: 4.40 in
- Width: 4.90 in
- HDMI Compliance: HDMI 20a
- HDCP Compliance: HDCP 22
- Video Bandwidth: Single-link 594MHz [18Gbps]
- Video Support: HDR 4K at 60Hz (4:2:0 10-bit color) / 4K at 60Hz (4:4:4 8-bit color)
- HDMI over UTP: Yes
- Audio Support: Surround sound [up to 71ch) or stereo digital audio
- Input TMDS signal: 12 Volts [peak-to-peak]
- Input DDC Signal: 5 Volts [peak-to-peak, TTL]
- ESD Protection: Human body model - ±15kV [air-gap discharge] and ±8kV [contact discharge]
- PCB stack-up: 4-layer board [impedance control – differential 100ohms; single 50ohms]
- IR Pass-Thru: Bi-directional
- HDMI Source Control: Controllable via IR pass-through from RX to TX with IR extenders
- HDMI Connector: Type A [19-pin female]
- 35mm connector: IR receiver/IR blaster
- Storage Temperature: -20~60°C [-4~140°F]
- Relative Humidity: 20~90% RH [no condensation]
Create Spaces
623 S Americana Blvd, Boise, ID 83702
Boise, ID 83702
USA
2083850507
https://createspaces.com/