Digital Optical Audio 3x1 Switch with IR

Model: PA-SW31T

Three digital optical audio input signals switch to one digital optical audio output
Supports all Toslink/SPDIF digital optical audio formats up to DTS & DD 5.1CH and 192KHz
Output distance is up to 40m using quality optical fiber cable with loss of less than 0.2Db/m
Input can be selected through remote control or button on the switch
Can be placed out of sight with the included IR receiver

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The PulseAudio PA-SW31T digital optical audio switcher allows for up to three SPDIF/ TOSLINK digital audio sources to be selected to play to a device with a SPDIF/TOSLINK digital audio optical input. Inputs can be selected with the provided IR remote, or with a 3rd party universal remote for easy and flexible control.

Three digital optical audio input signals switch to one digital optical audio output
Supports all Toslink/SPDIF digital optical audio formats up to DTS & DD 5.1CH and 192KHz
Output distance is up to 40m using quality optical fiber cable with loss of less than 0.2Db/m
Input can be selected through remote control or button on the switch
Can be placed out of sight with the included IR receiver
Discreet IR source selection
Package Contents:
(1) PulseAudio PA-SW31T 3×1 Switch
(1) Remote Control
(1) 5V USB Cable
(1) IR Receiver
(1) Product Manual

Spec Sheet available - Yes

Depth: 2.10 in
Height: 0.90 in
Width: 2.10 in
Product Weight: 0.07 lbs
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Current Draw: 0.10 Amps
DC Voltage: 5 Volts
Support Audio Format: LPCM2.0/DTS/Dolby-AC3
Peak Wavelength: 650nm
Max Baud Rate: 16 Gbps
Output Cable Distance: < 40m (use the optical fiber cable loss less the 0.2Db/m)
Operating Temperature Range: 0 to 40 degrees Celsius
Operating Humidity Range: 5 to 90% RH (no condensation)

Switch 1041709 kb - Data Sheet

Project List