Pocketalker 2.0 Personal Amplifier
Model: PKT 2.0-0
- Ergonomic, lightweight design
- Extended high and low frequency range
- Superior sound quality
- Internal microphone
- Built-in T-coil loop compatible
Hear what you want to hear by amplifying the sounds and voices most important to you with a Pocketalker 2.0 (PKT E1). The Pocketalker personal amplifier is used to amplify specific sounds or voices. It helps you hear what you want to hear by reducing distracting background noise. This version of the Pocketalker does not come with a headphone or an earpiece.
The Pocketalker® 2.0 is a versatile, high quality assistive listening device designed to improve communications in difficult listening situations. The Pocketalker delivers clear, distinct sound, while its large, manageable controls provide for easy operation.
Use the Pocketalker to improve listening on a one-to-one basis, in small group situations, while listening to your favorite TV or radio programs, or while riding in the car.
The Pocketalker is not sold, advertised, or intended for use as a personal hearing aid. Williams Sound recommends that any individual experiencing hearing loss be examined by a physician/audiologist to determine the cause before using an amplification device like the Pocketalker.
- Ergonomic, lightweight design
- Extended high and low frequency range
- Superior sound quality
- Internal microphone
- Built-in T-coil loop compatible
- Rechargeable ready
- ROHS Compliant - Yes
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 41 F
- Certifications: CE, FCC, IC, WEEE
- Total Harmonic Distortion + Noise (THD+N): 1 %
- Height: 1 in
- Length: 4.90 in
- Width: 2 in
- Product Weight: 0.19 lbs
- Color: White
- Warranty (Length/Type): 5 Years
- PKT 2.0 EH:
•Material: ABS/Polycarbonate molded plastic case
•Battery Type: Two (AAA size), either 1.5 VDC Alkaline or 1.2 VDC NiMH rechargeable (Williams Sound BAT 010-2 Alkaline or BAT 022-2 NiMH)
•Battery Life: Up to 105 hours (typical usage) with the BAT 010-2 (Alkaline). Low Battery Indicator: Power “On” Green light on front panel flashes.
•NiMH battery Charging: Charging: 16 hours with BAT 022-2. Red LED blinks when charging. End of Charge: Red LED is on solid. At end of charge, maintenance charge is provided.
•Microphone: Internal, omnidirectional MEMS microphone (micro-electro-mechanical system). Optional External, omnidirectional, plug-in electret microphone with foam windscreen and 3.5mm mono plug (MIC 014-R).
•T-Coil: Internal with on/off switch and LED indicator
•Tone Control: External rotary control knob allows user to adjust high/low frequency to optimize hearing
•Balance Control: Adjusts Left/Right Volume Balance
•Power/Volume Control: External rotary volume control knob with integrated power ON-OFF switch
•Microphone Jack: 3.5 mm, stereo mini plug. Tip=Mic signal, Ring=NC, Sleeve=Gnd
•Headphone Jack: 3.5 mm, stereo mini plug. Tip=Left/Mono, Ring=Right, Sleeve=Gnd.
•Optional Accessories: Clip: CLP 014; Allows the user to clip MIC 014 to clothing such as a lapel or shirt pocket. Lanyard: RCS 003; Allows user to wear unit around the neck, or as a wrist strap. 3.5mm-3.5mm Extension Cord: WCA 007 WC; extends an external microphone to 12 ft. Stereo Earphones / Headphones / Neckloop: EAR 042 / HED 024, HED 036 / NKL 001-S (stereo) Neckloop Mono Earphones / Headphones / Neckloop: EAR 013, EAR 008, EAR 022, EAR 041 / HED 021, HED 027 / NKL 001 (mono) Neckloop Charging Kits: BAT KT7
•Power output: 52 mW (max) into 32 ohms (Stereo)
•ALC: Automatic Level Control; Limits maximum output level
•Max gain: 63 dB at 2.5 kHz (Tone=High)
•Frequency response: Tone Control at high position: 2.7dB boost at 5 kHz, 6.7dB cut at 400 Hz. Tone Control at mid position: 0.6dB cut at 5 kHz, 2.9dB cut at 400 Hz. Tone Control at low position: 2.0dB cut at 5 kHz, 3.0dB boost at 400 Hz
Create Spaces
623 S Americana Blvd, Boise, ID 83702
Boise, ID 83702
USA
2083850507
https://createspaces.com/