Patient Communication Kit

Model: PKT 2.0 SYS-1

Ergonomic, lightweight design
Extended high and low frequency range
Superior sound quality
Internal microphone
Built-in T-coil loop compatible

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The tools in this kit are designed to help strengthen communication and minimize frustration associated with healthcare provider-to-patient interaction from clinic visits to emergency room encounters to in-patient, hospital-room discussions. Ideal for one-on-one conversations with elders. This kit features the Pocketalker® 2.0 personal amplifier, which provides superior amplification of sounds closest to the listener while reducing background noise. Lightweight, portable and easy to clean, ideal for multiple-patient use. Ease of use means minimal staff training required. Can be used with or without hearing aids. ADA compliant.

Ergonomic, lightweight design
Extended high and low frequency range
Superior sound quality
Internal microphone
Built-in T-coil loop compatible
Rechargeable ready
System Includes:
(1) PKT 2.0 Pocketalker personal amplifier
(1) HED 024 headphone
(1) EAR 042 earphone
(1) CCS 043 system carry case
(1) EAR 045-100 sanitary headphone covers (100 pack)
(1) WND 012 sanitary microphone covers (100 pack)
(1) Cleaning Instructions

Warranty - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 41 F
Warranty (Length/Type): 5 Years
PKT 2.0 EH:
•Dimensions: 4.9 L x 2 W x 1-inch H. (124mm x 51mm x 25mm) (Not including clip or microphone assembly)
•Weight: 3.1 oz. (88 grams) (with batteries)
•Color/material: White ABS/Polycarbonate molded plastic case
•Battery Type: Two (AAA size), either 1.5 VDC Alkaline or 1.2 VDC NiMH rechargeable (Williams Sound BAT 010-2 Alkaline or BAT 022-2 NiMH)
•Battery Life: Up to 105 hours (typical usage) with the BAT 010-2 (Alkaline). Low Battery Indicator: Power “On” Green light on front panel flashes.
•NiMH battery Charging: Charging: 16 hours with BAT 022-2. Red LED blinks when charging. End of Charge: Red LED is on solid. At end of charge, maintenance charge is provided.
•Microphone: Internal, omnidirectional MEMS microphone (micro-electro-mechanical system). Optional External, omnidirectional, plug-in electret microphone with foam windscreen and 3.5mm mono plug (MIC 014-R).
•T-Coil: Internal with on/off switch and LED indicator
•Tone Control: External rotary control knob allows user to adjust high/low frequency to optimize hearing
•Balance Control: Adjusts Left/Right Volume Balance
•Power/Volume Control: External rotary volume control knob with integrated power ON-OFF switch
•Microphone Jack: 3.5 mm, stereo mini plug. Tip=Mic signal, Ring=NC, Sleeve=Gnd
•Headphone Jack: 3.5 mm, stereo mini plug. Tip=Left/Mono, Ring=Right, Sleeve=Gnd.
•Optional Accessories: Clip: CLP 014; Allows the user to clip MIC 014 to clothing such as a lapel or shirt pocket. Lanyard: RCS 003; Allows user to wear unit around the neck, or as a wrist strap. 3.5mm-3.5mm Extension Cord: WCA 007 WC; extends an external microphone to 12 ft. Stereo Earphones / Headphones / Neckloop: EAR 042 / HED 024, HED 036 / NKL 001-S (stereo) Neckloop Mono Earphones / Headphones / Neckloop: EAR 013, EAR 008, EAR 022, EAR 041 / HED 021, HED 027 / NKL 001 (mono) Neckloop Charging Kits: BAT KT7
•Power output: 52 mW (max) into 32 ohms (Stereo)
•ALC: Automatic Level Control; Limits maximum output level
•Distortion: 1% THD (max)
•Max gain: 63 dB at 2.5 kHz (Tone=High)
•Frequency response: Tone Control at high position: 2.7dB boost at 5 kHz, 6.7dB cut at 400 Hz. Tone Control at mid position: 0.6dB cut at 5 kHz, 2.9dB cut at 400 Hz. Tone Control at low position: 2.0dB cut at 5 kHz, 3.0dB boost at 400 Hz
EAR 042:
•Style: Dual, in-ear, isolation earphones
•Plug: 3.5mm stereo
•Cord: 39"
•Driver Size: 10 mm
•Nominal Impedance: 32ohms
•Frequency Response: 20 - 20kHz
•Weight: 10g
•Max Power Input: 5 mW
•Sensitivity: 104 dB at 1kHz
•Replacement Silicone Tips: EAR 043 (0ne pair)
HED 024:
•Style: Stereo Headphones
•Plug: 3.5mm stereo
•Cord: 39"
•Driver Size: 30 mm
•Nominal Impedance: 16ohms
•Frequency Response: 20 - 20kHz
•Weight: 60g
•Max Power Input: 100 mW
•Sensitivity: 108 dB at 1kHz
•Replacement Pads: HED 023 (one pair)

Kit 284498 kb - Data Sheet

Project List