Control Systems : Control Processors & Controllers : Crestron Electronics, Inc. - DM-RMC-200-C

DigitalMedia 8G+™ Receiver & Room Controller 200

Series: DigitalMedia

Model: DM-RMC-200-C

Part #: 6504128

DM 8G+ input supports up to 330ft (100m) cable length
Connects to DM switcher or transmitter over one CAT5e or Crestron DM 8G cable
Provides one HDMI or DVI display output
Accepts any computer source from VGA to UXGA/WUXGA
Provides intelligent frame rate conversion

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

DigitalMedia 8G+ receiver and room controller provides an advanced one-box interface solution for single display device as part of complete Crestron DigitalMedia system. It functions as DM 8G+ receiver, video scaler, audio amplifier and control interface providing single HDMI output along with speaker and line level audio, plus Ethernet, USB HID and variety of control ports. In addition to DM 8G+, it is also compatible with HDBaseT specifications allowing it to be connected directly to any HDBaseT compliant source. Built-in scaling allows the connected display to handle virtually any video signal. Its compact, low-profile design allows the DM-RMC-200-C to be installed discreetly behind flat panel display or above ceiling mounted projector. It connects to the head end or source location using single CAT5e or Crestron DM 8G cable.

DM 8G+ input supports up to 330ft (100m) cable length
Connects to DM switcher or transmitter over one CAT5e or Crestron DM 8G cable
Provides one HDMI or DVI display output
Accepts any computer source from VGA to UXGA/WUXGA
Provides intelligent frame rate conversion
Allows motion-adaptive de-interlacing or interlacing
Allows adjustable overscan or underscan up to 7.5%
Provides automatic 3D to 2D signal conversion
Automatically passes 3D video without scaling to 3D capable displays
Includes content-adaptive noise reduction
100% HDCP compliant
Scalable zoom feature enables 2x2, 3x2, 3x3, 4x3 or 4x4 video wall capability
Handles Dolby TrueHD, DTS-HD Master Audio and uncompressed 7.1 linear PCM audio
Provides a stereo analog line level audio output
Includes built-in 30W stereo amplifier
Provides 10/100 Ethernet and USB HID mouse/keyboard ports
Enables device control via CEC, IR, RS-232 and Ethernet
Provides two relay control ports and two contact sensing inputs
Allows quick, easy setup and diagnostics
Includes mounting bracket with integral power pack holder
Universal power pack included

Ethernet Monitoring & Control - Yes
Systems Controlled - Audio
Systems Controlled - Media
Systems Controlled - Video
RX RS-232 - No
Spec Sheet available - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Ethernet Monitoring & Control: Yes
AC Voltage: 240 Volts
DC Voltage: 24 Volts
Depth: 1.85 in
Height: 7.92 in
Width: 10.84 in
Video Input Signal Types: DM 8G+, HDBaseT
Video Output Signal Types: HDMI, DVI
Audio Input Signal Types: DM 8G+, HDBaseT
Audio Output Signal Types: HDMI, analog stereo
Audio Frequency Response: 20Hz to 20kHz (±0.5dB)
Audio Signal to Noise Ratio: >95dB (line), >75dB (speaker) (20Hz to 20kHz A-weighted)
Audio THD + N: <0.005% (line), <0.3% (speaker) (at 1kHz)
Power Requirements: 2A at 24Vdc, 100 to 240Vac, 50/60Hz power pack
Heat Dissipation: 50 BTU/hr (power amp off)
Heat dissipation (typical): 60 BTU/hr (power amp on)
Heat Dissipation (Maximum): 165 BTU/hr (power amp on)
Product Weight: 3.26 lbs

DM-RMC-200-S - DigitalMedia 8G™ Fiber Receiver & Room Controller 200

DM-RMC-4KZ-100-C - DigitalMedia 8G+ 4K60 4:4:4 HDR Receiver and Room Controller

DMPS3-4K-250-C - 3-series 4K DigitalMedia Presentation System 250 with AirMedia 2.0 capability built-in

SAROS SB-200-P - Saros Powered Stereo Sound Bar

Receiver and Room Controller 1224 kb - Data Sheet

Project List