DigitalMedia 8G+ 4K60 4:4:4 HDR Receiver and Room Controller
Model: DM-RMC-4KZ-100-C
Part #: 6508077
- DigitalMedia 8G+® receiver and display controller
- Connects to a DM® switcher or transmitter over a single CAT type twisted pair cable
- HDBaseT® compatible - enables direct connection to other HDBaseT certified equipment
- Provides one HDMI® or DVI display output
- Handles UHD and 4K video resolutions up to 4K60 4:4:4
Provides a controller and interface for an HD or 4K display device as part of a complete DigitalMedia™ System. Supports 4K60 4:4:4 and HDR video signals. Connects to the DM 8G+® output of a DM® Switcher or Transmitter via a single CATx cable. Includes IR, RS-232, and Ethernet control ports.
Overview:
The DM-RMC-4KZ-100-C provides a simple one-box interface solution for a single display device as part of a complete Crestron® DigitalMedia™ system. It functions as a DM 8G+® receiver and control interface, providing a single HDMI® output along with Ethernet, RS-232, and IR control ports. In addition to DM 8G+, it is also compatible with HDBaseT®, which allows it to be connected directly to an HDBaseT certified source. Its compact, low-profile design allows the DM-RMC-4KZ-100-C to be installed discreetly behind a flat panel display or above a ceiling mounted projector. It connects to the head end or source location using a single CAT type twisted pair cable.
4K60 4:4:4 & HDR Support
Crestron DigitalMedia (DM®) was the world’s first AV signal distribution solution to deliver end-to-end 4K signal management for large-scale commercial and residential applications. DM “4KZ” endpoints and cards enable new and existing DM systems to handle full 4K60 4:4:4 video signals, as well as HDR video signals (HDR10), without having to replace any wiring or switchers. Any Crestron DM system that supports 4K can be upgraded to handle 4K60 4:4:4 and HDR by simply installing DM 4KZ based cards, transmitters, and receivers. The DM-RMC-4KZ-100-C is designed to replace an existing DM-RMC-4K-100-C receiver without requiring any extra configuration or programming.
DM 4KZ technology employs VESA® Display Stream Compression (DSC) to enhance the capabilities of DigitalMedia to handle the extreme bandwidth requirement of resolutions beyond 4K30 4:4:4 and 4K60 4:2:0. DSC is a lightweight, line-based 2:1 compression standard that delivers visually lossless performance for 4K60 4:4:4 and HDR signals. DSC is applied only to 4K60 4:4:4 and HDR input signals. All other signals are transported uncompressed.
- DigitalMedia 8G+® receiver and display controller
- Connects to a DM® switcher or transmitter over a single CAT type twisted pair cable
- HDBaseT® compatible - enables direct connection to other HDBaseT certified equipment
- Provides one HDMI® or DVI display output
- Handles UHD and 4K video resolutions up to 4K60 4:4:4
- Handles HDR (high dynamic range) video (HDR10)
- Handles 3D video and deep color
- Handles Dolby® TrueHD, Dolby Atmos®, DTS HD®, DTS:X®, and uncompressed 7.1 linear PCM audio
- HDCP 2.2 compliant
- Supports cable lengths up to 330ft (100m) for all resolutions up to UHD and 4K using DM Ultra cable
- Supports cable lengths up to 330ft (100m) for 1080p, WUXGA, and 2K using DM 8G® cable or CAT5e
- Supports cable lengths up to 230ft (70m) for UHD and 4K using DM 8G cable or 165ft (50m) using CAT5e
- Provides a 10/100 Ethernet LAN connection
- Enables device control via CEC, IR, RS-232 and Ethernet
- Compatible with Crestron® USB over Ethernet extenders
- Allows quick, easy setup and diagnostics
- Low-profile surface mount design
- Powered via the DM connection or local power pack (included)
- Receiver/Transmitter Cable Type - HDMI
- Receiver/Transmitter Format Type - HDMI
- Supported Resolution - 1080i (1920x1080)
- Supported Resolution - 1080p (1920x1080)
- Supported Resolution - 4K (4096x2400)
- Supported Resolution - WQXGA (2560x1600)
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Transmission Range: 330 ft
- Certifications: CE, UL, FCC
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Current Draw: 0.75 Amps
- DC Voltage: 24 Volts
- Depth: 1.08 in
- Height: 6.09 in
- Width: 5.63 in
- Product Weight: 1.03 lbs
- Regulatory Compliance: HDCP
- Video:
•Input Signal Types: DM 8G+ and HDBaseT with HDR10, Deep Color, 3D, and 4K60 4:4:4 support
•Output Signal Types: HDMI w/HDR10, Deep Color, 3D, and 4K60 4:4:4 support (DVI compatible)
•Copy Protection: HDCP 2.2 - Audio:
•Input Signal Types: DM 8G+, HDBaseT
•Output Signal Type: HDMI
•Formats: Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS®, DTS ES, DTS 96/24, DTS HD High Res, DTS HD Master Audio, DTS:X, LPCM up to 8 channels - COMMUNICATIONS:
•Ethernet: 10/100Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP
•RS-232: 2-way device control and monitoring up to 115.2k baud with hardware and software handshaking (via control system)
•IR/Serial: 1-way device control via infrared up to 1.1 MHz or serial TTL/RS-232 (0-5 Volts) up to 19.2k baud (via control system)
•DigitalMedia: DM 8G+, HDCP 2.2, EDID, CEC, PoDM, Ethernet
•HDBaseT: HDCP 2.2, EDID, CEC, RS-232, PoE, Ethernet
•HDMI: HDCP 2.2, EDID, CEC - Connectors:
•LAN: (1) 8-pin RJ45 connector, female, shielded, 10Base-T/100Base-TX Ethernet port
•COM: (1) 5-pin 3.5 mm detachable terminal block, Bidirectional RS-232 port and Up to 115.2k baud, hardware and software handshaking support
•IR 1 - 2: (1) 4-pin 3.5 mm detachable terminal block, Comprises (2) IR/Serial ports
•IR output up to 1.1 MHz, 1-way serial TTL/RS-232 (0-5 Volts) up to 19200 baud
•24VDC 0.75A MAX: (1) 2.1 x 5.5 mm DC power connector, 24 Volt DC power input and PW-2407WU power pack included
•DM IN: (1) 8-pin RJ45 connector, female, shielded, DM 8G+ input, HDBaseT compliant and PoDM PD port (HDBaseT PoE compatible)
•Connects to the DM 8G+ output of a DM switcher, transmitter, or other DM device, or to an HDBaseT device, via CAT5e, Crestron DM-CBL-8G, or Crestron DM-CBL-ULTRA cable
•HDMI OUT: (1) HDMI Type A connector, female, HDMI digital video/audio output (DVI compatible)
•Ground: (1) 6-32 screw, Chassis ground lug - Controls and Indicators:
•LAN: (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity
•RESET: (1) Recessed pushbutton, for hardware reset
•SETUP: (1) Red LED and (1) recessed pushbutton, for Ethernet setup
•24VDC: (1) Green LED, indicates operating power supplied via PoDM, HDBaseT PoE, or local power pack
•DM IN: (2) LEDs, green LED indicates DM link status, amber LED indicates video and HDCP signal presence
•HDMI OUT: (1) Green LED, indicates video signal presence at the HDMI output - Power:
•Power over DM (PoDM): IEEE 802.3at Type 1 Class 0 (12.95 W) compliant PoDM PD (Powered Device), capable of being powered by a PoDM PSE (Power Sourcing Equipment)
•Power over HDBaseT: IEEE 802.3at Type 1 Class 0 (12.95 W) compliant HDBaseT PoE PD (Powered Device), capable of being powered by an HDBaseT PoE PSE (Power Sourcing Equipment) - Enclosure:
•Chassis: Metal, black finish, with (2) integral mounting flanges; vented front, top, and bottom
•Mounting: Freestanding, surface mount, or attach to a single rack rail
Create Spaces
623 S Americana Blvd, Boise, ID 83702
Boise, ID 83702
USA
2083850507
https://createspaces.com/