DigitalMedia 8G™ Fiber Transmitter 201

• Fiber Optic Signals Supported - Audio
• Fiber Optic Signals Supported - HDMI
• Fiber Optic Signals Supported - RGB
• Fiber Optic Signals Supported - VGA
• Spec Sheet available - Yes

• Operating Temperature (Maximum): 104 F
• Operating Temperature (Minimum): 32 F
• Depth: 1.24 in
• Height: 6.47 in
• Width: 7.36 in
• Product Weight: 1.52 lbs
• Current Draw: 0.75 Amps
• DC Voltage: 24 Volts
• Signal to Noise Ratio: 90 dB
• AC Voltage (Maximum): 240 Volts
• AC Voltage (Minimum): 100 Volts
• Note: Audio breakaway capability enables the analog audio input to be used with either video input
• Video:
  • Input Signal Types: HDMI®, DVI[2], DisplayPort Multimode[2], RGB/VGA, component[3], S-Video[3], composite
  • Output Signal Types: DM 8G® Fiber (DigitalMedia™ over one multimode fiber optic strand), HDMI, DVI[2]
  • Formats: DM 8G Fiber, HDMI, DVI, HDCP content protection support, RGBHV, RGBS, RGsB, YPbPr, Y/C, NTSC, PAL
  • Input Resolutions, HDMI & DVI, Progressive: 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1080@24Hz, 2048x1152@60Hz, plus any other resolution allowed by HDMI up to 165MHz pixel clock
  • Input Resolutions, HDMI & DVI, Interlaced: 720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus any other resolution allowed by HDMI up to 165MHz pixel clock
  • Input Resolutions, RGB: 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 1024x768@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1152@60Hz
  • Input Resolutions, Component[3] : 480i, 576i, 480p, 576p, 720p50, 720p60, 1080p24, 1080i25 (1125 lines), 1080i30, 1080p30, 1080p50 (1125 lines), 1080p60
  • Input Resolutions, Composite and S-Video: 480i, 576i
  • Output Resolutions: Matched to inputs
  • Analog-To-Digital Conversion: 10-bit 165 MHz per each of 3 channels

Audio:

• Output Signal Types: DM 8G Fiber, HDMI
• Formats, HDMI: Dolby Digital®, Dolby Digital EX, DTS®, DTS-ES, DTS 96/24, up to 8ch PCM
• Formats, Analog: Stereo 2-channel
• Analog-To-Digital Conversion: 24-bit 48 kHz
• Performance (analog):
  • THD+N: <0.05% @ 1kHz
  • Stereo Separation: >90dB

COMMUNICATIONS:

• Ethernet: 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP
• USB: Supports signal extension of USB HID class devices, expandable to support virtually any USB 1.1 or 2.0 device using Crestron USB-EXT-DM USB over Ethernet Extenders[4]
• DigitalMedia: DM 8G Fiber, HDCP, EDID, CEC, Ethernet
• HDMI: HDCP, EDID, CEC
• NOTE: Supports management of HDCP and EDID; supports pass-through and management of CEC between HDMI source and sink, or between the connected HDMI source device and a control system

Connectors:

• LAN: (1) 8-wire RJ45 female, shielded
  10Base-T/100Base-TX Ethernet port
• DM OUT MMF/SC: (1) SC female optical fiber connector
  DM 8G Fiber output
  Connects to DM 8G Fiber input of a DM switcher, receiver/room controller, or other DM device via CresFiber 8G fiber optic cable
  
• HDMI OUT: (1) 19-pin Type A HDMI female
  HDMI digital video/audio output
  Also supports DVI
  
• PWR 24VDC 0.75A: (1) 2.1 x 5.5 mm DC power connector
  24 Volt DC power input
  PW-2407WU power pack included
  
• Ground: (1) 6-32 screw, chassis ground lug
• USB HID: (1) USB Type B female
  USB 2.0 device port for connection to the USB host interface of a computer or other USB HID-compliant host
  
• HDMI IN: (1) 19-pin Type A HDMI female
  HDMI digital video/audio input
  Also supports DVI and DisplayPort Multimode[2]
  
• RGB IN: (1) DB15HD female
  RGB (VGA), component, S-Video, or composite video input[3]
  Formats: RGBHV, RGBS, RGsB, YPbPr, Y/C, NTSC, PAL
  Input Levels: 0.5 to 1.5 Vp-p with built-in DC restoration
  Input Impedance: 75 Ohms
  Sync Input Type: Autodetect RGBHV, RGBS, RGsB, YPbPr
  Sync Input Level: 3 to 5 Vp-p
  Sync Input Impedance: 1k Ohms
  
• AUDIO IN: (1) 3.5mm TRS mini phone jack
  Unbalanced stereo line-level audio input
  Input Level: 2 Vrms maximum
  Input Impedance: 10k Ohms
  

Controls & Indicators :

• LAN: (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity
• DM OUT: (1) green LED, indicates DM link status
• PWR: (1) green LED, indicates operating power supplied via local power pack
• HDMI IN: (1) green LED, indicates HDMI input is selected
• RGB IN: (1) green LED, indicates RGB input is selected
• SETUP: (1) red LED and (1) miniature recessed pushbutton for Ethernet setup
• RESET: (1) miniature recessed pushbutton for hardware reset

Environmental:

• Humidity: 10% to 90% RH (non-condensing)
• Heat Dissipation: 61 BTU/Hr

Enclosure:

• Chassis: Metal, black finish, with (2) integral mounting flanges, vented sides
• Mounting: Freestanding, surface mount, or attach to a single rack rail

Notes:

• 1. The maximum cable length for DigitalMedia 8G Fiber (DM 8G Fiber) is 1000 ft (300 m) using Crestron CRESFIBER8G multimode fiber optic cable, or 500 ft (150 m) using Crestron legacy CRESFIBER, Crestron CRESFIBER-SINGLE-SC, or third-party OM3 simplex multimode fiber optic cable. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines. All wire and cables are sold separately.
• 2. HDMI requires an appropriate adapter or interface cable to accommodate a DVI or DisplayPort Multimode signal. CBL-HD-DVI interface cables are available separately.
• 3. The RGB/VGA input can actually accept component, composite, and S-Video signals through an appropriate adapter (not included), or via direct interface to Crestron MPS Series products. However, input sync detection is not provided for composite or S-Video signal types through this connection.
• 4. USB-EXT-DM USB over Ethernet Extender Modules are sold separately. Refer to the USB-EXT-DM spec sheet for more information.

Maximum Frequency Response (Bandwidth): 20 kHz

Maximum Frequency Response (Bandwidth): 20000 Hz

Minimum Frequency Response (Bandwidth): 20 Hz

Minimum Frequency Response (Bandwidth): 0.02 kHz

Number of Multimode Inputs: 2

Number of Multimode Outputs: 1