DigitalMedia 8G+ 4K60 4:4:4 HDR Transmitter with 3 x 1 Built-in Auto Switcher
Model: DM-TX-4KZ-302-C
Part #: 6508078
- DigitalMedia 8G+® transmitter and multimedia interface
- Built-in 3x1 auto-switcher with two HDMI® inputs and one DisplayPort input
- Connects to a DM® switcher or receiver over a single CAT type twisted pair cable
- HDBaseT® compatible - enables direct connection to other HDBaseT certified equipment
- Local HDMI output (DVI compatible)
Provides a multi-input, auto-switching interface and controller for 4K HDMI® and DisplayPort sources as part of a complete DigitalMedia™ System. Supports 4K60 4:4:4 and HDR video signals. Connects to the DM 8G+® input of a DM® Switcher or Receiver via a single CATx cable. Includes IR, RS-232, and Ethernet control ports, and USB HID device and host signal extension ports. Compatible with HDBaseT® and Crestron Connect It™.
Overview:
The DM-TX-4KZ-302-C provides a versatile interface for ultra high-definition AV and computer sources as part of a complete Crestron® DigitalMedia™ system. It functions as a DM 8G+® transmitter and switcher with HDMI® and DisplayPort inputs. It also functions as a control module, providing RS-232 and IR control ports, plus Ethernet and USB HID ports for a total connectivity solution.
Its low-profile, surface-mountable design makes the DM-TX-4KZ-302-C ideal for installation beneath a conference table, inside a lectern or equipment rack, or at virtually any other location in a boardroom, classroom, auditorium, or residence. It connects to the head end or display location using a single CAT type twisted pair cable. In addition to DM 8G+, it is also compatible with HDBaseT®, which allows it to be connected directly to the input of an HDBaseT certified display device.
4K60 4:4:4 & HDR Support
Crestron DigitalMedia (DM®) was the world’s first AV signal distribution solution to deliver end-to-end 4K signal management for large-scale commercial and residential applications. DM “4KZ” endpoints and cards enable new and existing DM systems to handle full 4K60 4:4:4 video signals, as well as HDR video signals (HDR10), without having to replace any wiring or switchers. Any Crestron DM system that supports 4K can be upgraded to handle 4K60 4:4:4 and HDR by simply installing DM 4KZ based transmitters, receivers, and I/O cards.
DM 4KZ technology employs VESA® Display Stream Compression (DSC) to enhance the capabilities of DigitalMedia to handle the extreme bandwidth requirement of resolutions beyond 4K30 4:4:4 and 4K60 4:2:0. DSC is a lightweight, line-based 2:1 compression standard that delivers visually lossless performance for 4K60 4:4:4 and HDR signals. DSC is applied only to 4K60 4:4:4 and HDR input signals. All other signals are transported uncompressed.
- DigitalMedia 8G+® transmitter and multimedia interface
- Built-in 3x1 auto-switcher with two HDMI® inputs and one DisplayPort input
- Connects to a DM® switcher or receiver over a single CAT type twisted pair cable
- HDBaseT® compatible - enables direct connection to other HDBaseT certified equipment
- Local HDMI output (DVI compatible)
- Handles UHD and 4K video resolutions up to 4K60 4:4:4
- Handles HDR (high dynamic range) video (HDR10)
- Handles 3D video and deep color
- Handles Dolby® TrueHD, Dolby Atmos®, DTS HD®, DTS:X®, and uncompressed 7.1 linear PCM audio
- HDCP 2.2 compliant
- Supports cable lengths up to 330ft (100m) for all resolutions up to UHD and 4K using DM Ultra cable
- Supports cable lengths up to 330ft (100m) for 1080p, WUXGA, and 2K using DM 8G® cable or CAT5e
- Supports cable lengths up to 230ft (70m) for UHD and 4K using DM 8G cable, or 165ft (50m) using CAT5e
- Detects and reports detailed video and audio input information
- Performs automatic AV signal format management via EDID
- QuickSwitch HD™ manages HDCP keys for fast, reliable switching
- Provides a 10/100 Ethernet LAN connection
- Enables device control via CEC, IR, RS-232, and Ethernet
- Enables USB HID signal extension for a local keyboard/mouse or computer
- Compatible with Crestron® USB over Ethernet Extenders
- Compatible with Crestron Connect It™ cable caddies
- Quick, easy setup and diagnostics
- Low-profile surface-mount design
- Powered via the DM connection or local power pack (included)
- Receiver/Transmitter Cable Type - HDMI
- Receiver/Transmitter Format Type - HDMI
- Supported Resolution - 4K (4096x2400)
- Depth: 1.07 in
- Height: 11.02 in
- Width: 5.34 in
- Regulatory Compliance: HDCP
- DC Voltage: 24 Volts
- Certifications: UL, CE, FCC
- Transmission Range: 330 ft
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Current Draw: 1.25 Amps
- AC Voltage (Minimum): 100 Volts
- AC Voltage (Maximum): 240 Volts
- Product Weight: 1.20 lbs
- Video:
•Switcher: 3x1 manual or auto-switching, Crestron QuickSwitch HD technology
•Input Signal Types: HDMI with HDR10, Deep Color, 3D, and 4K60 4:4:4 support (DVI and Dual-Mode DisplayPort compatible), DisplayPort with Deep Color and 4K60 4:4:4 support
•Output Signal Types: DM 8G+ and HDBaseT with HDR10, Deep Color, 3D, and 4K60 4:4:4 support, HDMI with HDR10, Deep Color, 3D, and 4K60 4:4:4 support (DVI compatible)
•Copy Protection: HDCP 2.2 - Audio:
•Switcher: 3x1, audio-follow-video
•Input Signal Types: HDMI (Dual-Mode DisplayPort compatible), DisplayPort
•Output Signal Types: DM 8G+ and HDBaseT, HDMI
•Formats, HDMI: Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS®, DTS ES, DTS 96/24, DTS HD High Res, DTS HD Master Audio, DTS:X, LPCM up to 8 channels
•Formats, DisplayPort: Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, DTS, DTS ES, DTS 96/24, DTS HD High Res, DTS HD Master Audio, LPCM up to 8 channels - COMMUNICATIONS:
•Ethernet: 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP
•USB Host: Supports signal extension of USB HID class devices, supports a TT-100 or TT2-100 series cable caddy
•USB Device: Supports USB HID signal extension to a USB host, supports computer console (for setup)
•RS-232: 2-way device control and monitoring up to 115.2k baud with hardware and software handshaking (via control system)
•IR/Serial: 1-way device control via infrared up to 1.1 MHz or serial TTL/RS-232 (0-5 Volts) up to 19.2k baud (via control system)
•DigitalMedia: DM 8G+, HDCP 2.2, EDID, CEC, PoDM+, Ethernet
•HDBaseT: HDCP 2.2, EDID, CEC, RS-232, PoE+, Ethernet
•HDMI: HDCP 2.2, EDID, CEC
•DisplayPort: HDCP 2.2, EDID - Connectors:
•24 VDC 1.0 A: (1) 2.1 x 5.5 mm DC power connector
•24 Volt DC power input
•PW-2412WU power pack included
•DM OUT: (1) 8-pin RJ45 connector, female, shielded
•DM 8G+ output, HDBaseT compliant
•PoDM+ PD port (HDBaseT PoE+ compatible)
•Connects to the DM 8G+ input of a DM switcher, receiver, or other DM device, or to an HDBaseT device, via CAT5e, Crestron DM-CBL-8G, or Crestron DM-CBL-ULTRA cable
•HDMI OUT: (1) HDMI Type A connector, female
•HDMI digital video/audio output (DVI compatible)
•HDMI IN 1 – 2: (2) HDMI Type A connectors, female
•HDMI digital video/audio inputs (DVI and Dual-Mode DisplayPort compatible)
•DISPLAY PORT IN: (1) DisplayPort connector, female DisplayPort digital video/audio input
•USB HID: (1) USB Type A connector, female
•USB 2.0 host port for connection of a mouse/keyboard or other USB HID-compliant device (USB signal extension and routing), or for connection of one TT-100 or TT2-100 series cable caddy
•COMPUTER: (1) USB Type B connector, female
•USB 2.0 device port for computer console (setup), or for connection to a computer or other USB HID-compliant host (USB signal extension and routing)
•LAN: (1) 8-pin RJ45 connector, female 10Base-T/100Base-TX Ethernet port
•COM: (1) 5-pin 3.5 mm detachable terminal block Bidirectional RS-232 port
•Up to 115.2k baud, hardware and software handshaking support
•IR: (1) 2-pin 3.5 mm detachable terminal block
•IR/Serial port
•IR output up to 1.1MHz
•1-way serial TTL/RS-232 (0-5 Volts) up to 19200 baud
•Ground: (1) 6-32 screw Chassis ground lug - Controls and Indicators:
•24 VDC: (1) Green LED, indicates operating power supplied via PoDM+, HDBaseT PoE+, or a local power pack
•DM OUT: (2) LEDs, green LED indicates DM link status, amber LED indicates video and HDCP signal presence
•HDMI OUT: (1) Green LED, indicates HDMI signal presence at the HDMI output
•HDMI IN 1 – 2: (2) Green LEDs, each indicates HDMI signal presence at the corresponding HDMI input
•DISPLAY PORT IN: (1) Green LED, indicates video signal presence at the DisplayPort input
•LAN: (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity
•SETUP: (1) Red LED and (1) recessed pushbutton for Ethernet setup
•RESET: (1) Recessed pushbutton for hardware reset - Power:
•Power Pack (included): Input: 100-240 Volts AC, 50/60 Hz, Output: 1.25 Amps at 24 Volts DC, Model: PW-2412WU
•Power over DM (PoDM): IEEE 802.3at Type 2 Class 4 (25.5 W) compliant PoDM+ PD (Powered Device), capable of being powered by a PoDM+ PSE (Power Sourcing Equipment)
•Power over HDBaseT: IEEE 802.3at Type 2 Class 4 (25.5 W) compliant HDBaseT PoE+ PD (Powered Device), capable of being powered by an HDBaseT PoE+ PSE (Power Sourcing Equipment)
•Power Consumption: 12.6 Watts typical using power pack, 13.4 Watts typical using PoDM+ or HDBaseT PoE+ (without a USB powered device connected) - Enclosure:
•Chassis: Metal, black finish, with (2) integral mounting flanges, vented top, front, and bottom
•Mounting: Freestanding, surface mount, or attach to a single rack rail
Create Spaces
623 S Americana Blvd, Boise, ID 83702
Boise, ID 83702
USA
2083850507
https://createspaces.com/